Visit my new blog

I´ve decided to split my blog in two. I will continue to post DIY projects and musings here, but (serious) pictures, taken on film of course, will be posted in my new blog "Silver Halides"

I now consider Caffenol to be a developer like any else. As such the new blog will focus more on the pictures, rather than the process.

Thursday, 5 May 2011

I Adore, the 6x17 camera

The "I Adore" front (notice the sliding back door cover protruding from the side handle)

When I built my first DIY camera I started the project with the intention of building a 6x17. Somewhere down the road I convinced myself that building a multi format camera would be a better idea. Sooner or later I had to rectify this misconception. Don´t get me wrong, I loved building the 4x5/6x12 P+S, but I have to try out 6x17 one way or the other. The idea resurfaced one evening when looking at two bottles of Cognac in their wooden cases. The cases looked to be a good starting points for a panoramic camera. There had be some rather peculiar design points. For one the back has to have to slide into place, meaning the pressure plate has to have to be detached from the back. I had to make a light box/mask that can be removed in order to gain access to the film spools (tight fit). I´ve scrounged parts from an old Genos Rapid, the film rollers, the film tensioners, the red film counter window, the winder knob and so on. I've used the same lens and helical (mounted on a Linhof lens board) as for the P+S. Getting the thing light tight was the main challenge, but hey - thats half the fun. Luckily an acquaintance of mine has sent me 10 rolls of expired film I can play around with for testing purposes.

The A E Dor ( I Adore ) case was the better of the two and formed the basis for the light tight chamber. I chamfered the front corners and crafted two hardwood handles for the side walls, one of which has a slit to accept the sliding rear door. I clad front, top and bottom in oak. I made a combined chambre noir and film gate, removable in order to gain access to the film spool holders (very tight fit), the pressure plate can't be attached to the rear door, so is also removable. Not much to it really.

Some more pictures:


And the first test picture. Forgive the scanning artifacts, I don't have a film holder for 6x17 negs, so it was scanned straight of the glass.

Sande bay, Norway, "I Adore" 6x17, HP5+, EI 400, Caffenol-C-H (RSA) 13min @ 20C, 4min presoak

9 comments:

  1. Great!!! (both camera & the photo)

    ReplyDelete
  2. Thanks. I´m itching to get out and use it more.

    ReplyDelete
  3. Awesome !!!

    Any instructions?

    ReplyDelete
  4. Hi. Sorry, no. The camera more or less evolved, and I didn't make notes.

    ReplyDelete
  5. great..what the height of the camera? how much gap u leave so that the spool is still removeable when the roll has finished??

    ReplyDelete
  6. Strong, stable and versatile, Wfs-Store Worktop mature age and last a lifetime. We are passionate about our solid Wooden Worktops
    , choosing only the best species in the world.

    ReplyDelete
  7. What viewfinder are you using there? I'm looking to build one myself and am in need of a viewfinder. Thanks!

    ReplyDelete